DFI PT631-IPM - Manual (Page 29)

29
2
Hardware Installation
Power-on Select
To power-on via WOL after G3:
1. Set JP6 pins 2 and 3 to On.
2. Set the “After G3” field to Power Off/WOL.
3. Set the “GbE Wake Up From S5” to Enabled.
The BIOS fields are in the “South Bridge Configuration” submenu (Chipset menu)
of the AMI BIOS utility.
To power-on via AC Power:
1. Set JP6 pins 2 and 3 to On.
2. Set the “After G3” field to Power On.
1-2 On:
Power-on via power button
(default)
2-3 On:
Power-on via AC power;
or
Power-on via WOL after G3
JP6
1
3
2
1
3
2