DFI PT631-IPM - Manual (Page 72)

72
3
BIOS Setup
AHCI Configuration
This section is used to configure AHCI.
Enables for supporting
AHCI controller operates
in AHCI mode during
BIOS control otherwise
operates in IDE mode.
BIOS SETUP UTILITY
v02.67 (C)Copyright 1985-2009, American Megatrends, Inc.
← → Select Screen
↑↓ Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
AHCI Settings
AHCI BIOS Support

AHCI Port0 [Not Detected]

AHCI Port1 [Not Detected]

AHCI Port2 [Not Detected]

AHCI Port3 [Not Detected]

AHCI Port4 [Not Detected]

AHCI Port5 [Not Detected]
Advanced
[Enabled]
AHCI BIOS Support
Enable this field to allow the AHCI controller to operate in AHCI mode during
BIOS control otherwise it will operate in IDE mode.