DFI PT631-IPM - Manual (Page 99)

99
3
BIOS Setup
Discard Changes and Exit
To exit the Setup utility without saving the changes, select this field then press
<Enter>. A dialog box will appear. Confirm by selecting OK.
You can also press <ESC> to exit without saving the changes.
Exit system setup
without saving any
changes.
ESC key can be used
for this operation.
BIOS SETUP UTILITY
Chipset
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
← → Select Screen
↑↓ Select Item
Enter Go to Sub Screen
F1 General Help
F10 Save and Exit
ESC Exit
Boot Security Main Advanced PCIPnP
Exit Options
Save Changes and Exit
Discard Changes and Exit
Discard Changes
Load Optimal Defaults
Load Failsafe Defaults
Exit
Discard changes and exit setup?
[Cancel] [Ok]
Discard Changes
To discard the changes, select this field then press <Enter>. A dialog box will ap-
pear. Confirm by selecting OK to discard all changes made and restore the previ-
ously saved settings.
You can also press <F7> to discard the changes.
Discards changes
done so far to any of
the setup questions.
F7 key can be used
for this operation.
BIOS SETUP UTILITY
Chipset
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
← → Select Screen
↑↓ Select Item
Enter Go to Sub Screen
F1 General Help
F10 Save and Exit
ESC Exit
Boot Security Main Advanced PCIPnP
Exit Options
Save Changes and Exit
Discard Changes and Exit
Discard Changes
Load Optimal Defaults
Load Failsafe Defaults
Exit
Discard Changes?
[Cancel] [Ok]