Digi-Star EZ 3200/EZ 3200V/EZ 3200V RC - Manual (Page 12)

Digi-Star Model EZ3200/EZ3200V/EZ3200V RC 6. System operation
9
! copyright - 10/24/2001
6. System operation
! EZ3200 V shown - EZ3200 and ES3200V RC operations are the same.
! LB and KG annunciators are located along right hand edge of the 3200V display.
TURNING ON THE SCALE
Press
.
A brief message will be displayed (such as HELLO).
The scale then enters the GROSS weighing mode.
GROSS mode displays the weight change since the
unit was last ZERO/BALANCED.
Pressing a second time during normal system
operation starts the self test.
TURNING OFF THE SCALE
Press .
TO ZERO BALANCE THE SCALE
Press and then within three seconds, press .
The [Zero] key will "balance off" empty trailer, bin,
or platform weight.
The message ZERO is displayed to show completion of
the step and the scale is placed in the GROSS
mode.
Pressing only will cause the message: TO
ZERO/BALANCE PRESS NET/ GROSS - THEN ZERO to be
displayed.
If the supply power is below the low battery threshold (10.5 Volts), the message CANNOT balance --
LOW BATTERY VOLTAGE is displayed. The message LO BAT will be periodically shown on the display
(approx. every five seconds) to alert the operator of the low battery condition.
Loss of power does not affect the Zero/Balance or Setup/Calibration values.
HELLO
zero
and