Digi-Star EZ 3200/EZ 3200V/EZ 3200V RC - Manual (Page 28)

Digi-Star Model EZ3200/EZ3200V/EZ3200V RC 6. System operation
25
! copyright - 10/24/2001
USING DELAY TIME
The Delay Time Feature allows an operator to select the amount of time the scale should wait
before automatically advancing to the next ingredient of the recipe. This helps insure accuracy
for the ingredient amount. For example, if the delay time is set to 10 (seconds) and the preset
alarms are activated continuously, the auto-advance circuitry starts the Delay time Counter. If
the preset de-activates, the delay time counter is reset, therefore assuring that the preset weight
amount has to be met for the total delay time amount.
Setting Delay Time to MANUAL prevents the scale from EVER auto-advancing, regardless of the
weight.
If loading a batch using a recipe, or must be pressed twice to advance the recipe to the
next ingredient. See page 25: To load a batch using a recipe .
TO CHANGE THE DELAY TIME 1. Go to Menu 4 of the Long Form Setup and
select DELAY (see page 14: To enter the Long
Form Setup ).
2. Press to select the delay time (in seconds)
to wait before automatically advancing.
Delay Time Selections in Seconds
MANUAL, 1, 2, 3, 5, 7, 10, 20, 30, or 60
!" Set to MANUAL to prevent automatic advance
after the ingredient amount has been
reached.
3. Press
to store the setting.
4. Press and hold and then press to
return to normal Weighing Mode.
TO LOAD A BATCH USING A RECIPE Either of the following methods can be used to load
a recipe while in the weighing modes:
Method 1
1. Press until the desired recipe number is
displayed.
2. Press to accept the recipe. Go to Step 4
(method 2).
delay 3
2
totamt
2
1