Digi-Star EZ 3200/EZ 3200V/EZ 3200V RC - Manual (Page 36)

Digi-Star Model EZ3200/EZ3200V/EZ3200V RC 7. Optional features
33
! copyright - 10/24/2001
TO USE FUNCTION & SELECT KEYS The [Function] key provides additional features for
operating the scale. The [Function] key is similar
to the F1 key of a computer. It provides Help and
additional functionality. The [Select] key is used to
determine what operation will occur when the
[Function] key is pressed.
is used to determine what operation will
occur when
is pressed.
1. Press to display the current operation of
the [Function] key.
2. Press to change the current operation.
Continue to press the [Select] key until the
desired operation is displayed.
!"
maintains the selected operation until is pressed again.
3. Press
at any time to perform the selected operation.
4. Press
once to display the operation assigned to the [Function] key.
! For example, if the word TIMER is displayed, then pressing the [Function] key will activate the
Rotation Counter. If the message M+ is displayed, then pressing the [Function] key will
cause the scale to perform the Memory Plus (M+) operation.
The [Function] key operation is stored in non-volatile memory. This allows the scale to
remember the operation of the [Function] key even when the unit is turned OFF.
Press the [Select] key once to display the operation currently assigned to the [Function] key.
HOLD
2/4
1/3