Digi-Star EZ 3200/EZ 3200V/EZ 3200V RC - Manual (Page 32)

Digi-Star Model EZ3200/EZ3200V/EZ3200V RC 6. System operation
29
! copyright - 10/24/2001
TO PRINT THE INGREDIENT TABLE
1. Press to review the ingredient
accumulations.
2. Press . This prints the total accumulation
for this ingredient.
3. Press again. Accumulations for all
ingredients currently used in all recipes will be
printed.
4. Press a third time. Now the entire
Ingredient table will be printed. This shows
the names for all 99 ingredients in the table.
Ingredients not currently used by a recipe
print
unused for their accumulation value
5. Press
to return to weighing.
The ingredient table shows which ingredient name
will be displayed while load/unloading ingredients
during batching or feeding (see
Appendix 1:
Ingredient names ).
TO RENAME INGREDIENTS 1. Enter Ingredient Program Mode by pressing
and holding
and then pressing
.
2. Continue holding both keys until the indicator
beeps and the scale displays the message
PROGRM.
3. The scale then displays the first ingredient
number in the table ING-01 . Use one of the
following methods to select the ingredient
name to edit:
Method 1
1. Press until the desired ingredient number
is displayed.
2. Press . Go to Step 3 of method 2 below.
01:0050
1
2-4
5
progrm 1
and
corn-1
1
2
1