Digi-Star EZ 3200/EZ 3200V/EZ 3200V RC - Manual (Page 25)

Digi-Star Model EZ3200/EZ3200V/EZ3200V RC 6. System operation
22
! copyright - 10/24/2001
9. The scale will display the message stored
indicating that the ingredient has been saved
into non-volatile memory. Non volatile memory
is a special type of memory that allows the
power to be removed from the scale without
losing any of the recipes.
10. Continue steps 5 through 8 until the desired
changes have been made.
11. Press to complete the recipe. The scale
will now calculate and display the total value
of the recipe.
12. Press to exit the Recipe Programming
Mode and enter weighing mode.
! Ingredient amounts can be changed, but to add ingredients to a recipe, first erase that
recipe and then re-program the recipe.
TO ERASE A RECIPE
1. Press and hold
and then press
.
Continue holding both keys until the indicator
beeps and the scale displays the message
PROGRM . The scale then displays the first recipe
number programmed REC-XX .
2. Press until the desired recipe number is
displayed or,
press and use numeric keypad to enter the
recipe number to be erased (e.g. rec-11).
3. Press and hold , then press to erase
the recipe.
4. Continue holding both keys until the indicator
beeps and displays the message PLEASE WAIT -
PRINTING RECIPES . To reprint the recipe, simply
press .
5. Press to erase the recipe. The message
RECipe 11 ERASED will be displayed.
6. Press to exit the Recipe Programming
Mode and enter the Weighing Mode.
7. To erase all recipes, continue steps 1 through 4
until all the recipes have been erased.
progrm
stored
12
11
and
2
3 rec-11
2
or
1
1
3
and
4
5
6