Pretar 5000 – Digi-Star EZ 3200/EZ 3200V/EZ 3200V RC User Manual
Page 17
Digi-Star Model EZ3200/EZ3200V/EZ3200V RC
6. System operation
14
! copyright - 10/24/2001
TO PRELOAD A TARE VALUE
The Preload Tare Feature (PRETAR) is useful for
weighing containers after they have already been
loaded. If the weight of the container is known, a
Tare Weight is preloaded in the scale and only the
Net Weight is displayed.
1. Balance the indicator (
and
).
2. Make sure the Preload Tare setting is set to ON
(Long Form Setup ! Menu 4).
TO ENTER MENU 4 OF THE LONG FORM SETUP
-
Press and hold
and then press
.
- Press
four times to select Menu 4.
- Press
repeatedly until PRETAR is displayed.
3. Press
to set the Pretar Option to ON.
4. Press
to store the setting.
5. Press and hold
and then press
to
return to normal Weighing Mode.
6. Add weight to the container.
7. Using the numeric keypad, enter the known
weight value of the unloaded container.
8. Press
.
The following example demonstrates a feed wagon
on a platform scale:
a) Balance the scale (
and
).
b) Weigh and record the weight of the unloaded
wagon.
c) Pull the wagon off the scale and load the wagon.
d) Using the numeric keypad, enter the known
wagon's weight in the Indicator.
e) Place loaded wagon back on the scale to see the
net weight.
The Tare Weight can also be automatically printed
by setting tareap (Tare Auto-Print) to
ON
in Menu 2
of the Long Form Setup.
TO ENTER MENU 2 OF THE LONG FORM SETUP
-
Press and hold
and then press
.
- Press
two times to select Menu 2.
- Press
repeatedly until tareap is displayed.
pretar
5000
3
4
5
8
20
1/2
1
and
2
2
7
7