Exacq exacqVision Virtual User Manual - Manual (Page 15)

www.e x acq.com
+1.317.845.5710
+44.1438.310163
USA (Corporate Headquarters)
Europe/Middle East/Asia
Page 15 of 44
4/12/2013
7. After the drive is finished resizing, run the sudo df /dev/sd* command. The drive should now show up with the added
space listed under 1K-blocks. In our example, the drive increased by 100GB, and we now see 206424760 1K-blocks.
8. Type logout to exit the CLI
9. Open exacqVision Client and click on the Config (Setup) icon . Navigate to storage in the site tree. Within five
minutes, the data drive should now report the additional disk space.