Exacq exacqVision Virtual User Manual - Manual (Page 5)

www.e x acq.com
+1.317.845.5710
+44.1438.310163
USA (Corporate Headquarters)
Europe/Middle East/Asia
Page 5 of 44
4/12/2013
5
exacqVision Web Service
exacqVision Web Service is enabled on exacqVision Virtual Appliance by default. The Web Service requires increasing the number of
CPU cores in the appliance to six and increasing the memory to 6GB. It is recommended that you install a second exacqVision Virtual
Appliance specifically for Web Service to allow better VMware DRS load balancing.
Access the web interface by opening a browser with the server’s IP address and port 8080. If the server will be used exclusively for
the Web Service, open a command line interface (CLI) session and enter sudo rc to invoke the Exacq Linux Utility Script to unload the
exacqVision server.