Exacq exacqVision Virtual User Manual - Manual (Page 17)

www.e x acq.com
+1.317.845.5710
+44.1438.310163
USA (Corporate Headquarters)
Europe/Middle East/Asia
Page 17 of 44
4/12/2013
4. On the Advance Options screen, note the Virtual Device Node ID and click next.
5. On the Ready to Complete screen, review the options and click Finish.
6. Click OK to close the Edit Setting screen and create the disk. You can watch the progress of the disk creation in the
Recent Tasks Pane. Do not proceed until the Reconfigure Virtual Machine task is complete.
7. Click on the console screen and wait for the server to display the default console screen:
8. Click in the console screen and press Enter to display the CLI. Log in as admin.
9. Rescan the SCSI host on host2 to discover the new drive using the following command:
echo “- - -“ | sudo tee /sys/class/scsi_host/host2/scan