Exacq exacqVision Virtual User Manual User Manual
Page 9
www.e
x
acq.com
+1.317.845.5710
+44.1438.310163
USA (Corporate Headquarters)
Europe/Middle East/Asia
Page 9 of 44
4/12/2013
The Web interface has two management tabs, as shown in the following illustration:
The System tab allows you to restart or shut down your server in a safe manner. Click the Time Zone button to set the
current time zone (the default time zone is UTC).
NOTE: The client and server can be in different time zones, but the server must be in the correct local zone.
The Network tab displays the current network configurations. You can click on the address button to change the address
from DHCP to static. From this screen you can also set the hostname and specify and Alternate DNS Server.
NOTE: If you change the address, you will lose connectivity to the web interface when you save the settings. You can then
type the new address in the browser to reconnect to the web interface. Do not change the IP address and hostname at
the same time, as the hostname change will not apply. After you change the IP address, you can then log back into the
web interface with the new address and then change the hostname.