Exacq exacqVision Virtual User Manual - Manual (Page 29)

www.e x acq.com
+1.317.845.5710
+44.1438.310163
USA (Corporate Headquarters)
Europe/Middle East/Asia
Page 29 of 44
4/12/2013
17. Edit the fStab to include the new label. Be sure to note case sensitivity. Open the fstab file using nano:
sudo nano /etc/fstab
Under the last line, insert a Label defining the new label used in the mkfs command. The mount point should be the full
path to mount point created previously.
18. Press CTRL+O and then Enter to save the file. Press CTRL+X to exit the editor.
19. Re-read the fstab file by typing this command:
sudo udevadm trigger
20. Mount the new volume by specifying the full device path name and mount point:
sudo mount /mnt/edvr/2
21. Use the df command to view the new disk. Notice that you now have a 4 TB volume