Flowserve MX Electronic Actuator - Manual (Page 3)

3
Limitorque MX Electronic Actuator FCD LMENIM2306-06 – 10/13
flowserve.com
4.4.1 Close Direction 42
4.4.2 Close Seating 42
4.4.3 Open Seating 42
4.5 Torque Switch Timer 43
4.5.1 Status 43
4.5.2 Torque Timer 43
4.6 Torque Setup 44
4.6.1 Close Torque Valve or Open Torque Valve 44
4.7 Position Setup 45
4.7.1 Set Position Limits for Electrical Operation 45
4.7.2 Set Position Limits for Manual Operation 45
4.8 Modutronic Option 47
4.8.1 Status 47
4.8.2 Proportional Band 47
4.8.3 Fail Position 47
4.8.4 Deadband 47
4.8.5 Polarity (20 mA) 47
4.8.6 Delay After Stop 48
4.8.7 4-20 mA Signal Range 48
4.8.8 Set High Reference 48
4.8.9 Set Low Reference 48
4.8.10 Modutronic LCD Display 49
4.9 DDC/Modbus Option 49
4.9.1 Status 49
4.9.2 Network Address 50
4.9.3 Protocol 50
4.9.4 Analog Scale 50
4.9.5 ESD Action 50
4.9.6 Proportional Band 51
4.9.7 Deadband 51
4.9.8 Offset 51
4.9.9 Move To 51
4.9.10 Comm Loss Delay 51
4.9.11 Comm Loss Action 51
4.10 FF Option 51
4.10.1 Status 52
4.10.2 Terminate Bus 52
4.10.3 Analog Scale 52
4.10.4 ESD Action 52
4.10.5 OPEN/CLOSE Mode 52
4.10.6 Proportional Band 52
4.10.7 Deadband 52
4.10.8 Comm Loss Delay 53
4.10.9 Comm Loss Action 53
4.11 PB Option 53
4.11.1 Status 54
4.11.2 PB DP Operation 54
4.11.3 Comm Loss Delay 55
4.11.4 Comm Loss Action 55
4.12 DN Option 56
4.12.1 Status 56
4.12.2 Baud Rate 56