MicroE Mercury II 6000V - Manual (Page 13)

Sensor Head Alignment -
Mercury II ™ 6000 Models – Alignment Verification
with Connector LEDs
B3.0
Connector LED Indicators
Once the encoder is aligned and calibrated using
the alignment tool, alignment can be visually
verified using the LED indicators on the MII6000
sensor’s connector. The left hand indicator reports
signal strength of the main track. The right hand
indicator reports the presence of the left limit, right
limit, and index marks.
Normal Operation
Optimal Signal
Strength
Marginal Signal
Strength
Bad Signal
Strength
Saturated Signal
Strength
Over Index
Mark
Over Left Limit
Mark
Over Right
Limit Mark
Not Over Any
Mark