MicroE Mercury II 6000V - Manual (Page 4)

Page 4 Section A - System Overview
System Overview
PurePrecision ™ Tape Scale
A2.1
Items Required for Mercury II TM Encoder
Installation Using Tape Scale
In addition to the items in the System Views,
you will need the following items available:
• Index and Limit Marker sheet
• Hex Wrench for Sensor Mounting Screws
• Shears
• Tape Applicator Tool
(not required for some installations)
• Finger Cots or talc-free gloves
• Acetone or isopropyl alcohol
• Lint-free cotton cloths or wipes
• Two-part epoxy (Tra-Con Tra-Bond 2116)
• Stick and disposable surface for stirring epoxy
Stick and disposable surface for stirring epoxy
•