MicroE Mercury II 6000V - Manual (Page 63)

Page 8 Section C - Linear Glass Scale Installation
Index and Limit Marker Installation
Linear Glass Scales
C2.1
Attaching the Index Marker to the
Glass Scale
Place the top edge of the marker at the top
edge of the scale so that the marker will not
over-hang the edge but will remain inside
the chrome reference track. See interface
drawings.° degree angle as shown in the
photo.
Press the marker onto the glass scale
with your finger to ensure full adhesion.
Note: Marker adhesive reaches it’s full cure
after 72 hours. Avoid vigorous wiping or
cleaning before this to prevent shifting or
peeling up the marker. Light wiping
pressure is okay.
* USE FINGER COTS