MicroE Mercury II 6000V - Manual (Page 7)

Page 7 Section B - Sensor Head Installation, Alignment and Calibration
Sensor Head Alignment -
Mercury II ™ 6000 Models
Access to Cal. button
B2.0
SmartPrecision Alignment Tool
Installing the MII6000 requires sensor alignment
and setup using the MII5000 SmartPrecision
Alignment Tool.
The Alignment Tool can perform sensor alignment,
calibration and setup by two methods -
A) ”Pushbutton:” using the Calibration (“Cal.”)
button and the LED indicators on the
Alignment Tool
OR
B) ”Software:” Using the SmartPrecision II
Software - see B2.4.