OpenEye Gen5 NVR - Manual (Page 31)

30777AC 31
EDIT LIVE VIEW CHANNELS
By default, the recorder only allows live video from four network channels at one time on the local
server. This protects the processor resources for recording data. The Radius software allows you to
view live video from multiple recorders at once and with the same limitations that the recorder has on
the number of live IP based video channels. If more than four channels of live video are required on the
local server, you can enable the recorder to show up to 16 channels. Be aware that displaying 16
channels of live IP based video is resource intensive and may dramatically impact system performance.
To enable the recorder to view 16 channels of live video:
1. Click Exit on the display screen and select Restart in Windows Mode.
2. Double-click the Edit Live View Channels icon on the desktop.
3. If you wish to continue, confirm the two warning windows.
The live view display will switch to 16 channel mode. To return the recorder to 4 channel mode, run the
utility again using the same instructions.
SCREEN DIVISION BUTTONS
Note When viewing live video from Network Cameras, only 4CH will display at one time. If more
live view channels are required on the local server, see the Edit Live View Channels
instructions.
1st Four Cameras View – Displays cameras 1-4 in the Video Display Area. To return to a
different Multi-Camera View, select a different Screen Division option from the Screen Division
menu.
2nd Four Cameras View – Displays cameras 5-8 in the Video Display Area. To return to a
different Multi-Camera View, select a different Screen Division option from the Screen Division
menu.
3rd Four Cameras View – Displays cameras 9-12 in the Video Display Area. To return to a
different Multi-Camera View, select a different Screen Division option from the Screen Division
menu.
4th Four Cameras View – Displays cameras 13-16 in the Video Display Area. To return to a
different Multi-Camera View, select a different Screen Division option from the Screen Division
menu.
Full Screen
– The Full Screen Option allows you to view the Video Display Area using the entire
viewable area on the monitor. When this is selected, no menu options are visible. You can
activate the Full Screen Option by clicking on the Full Screen button within the Screen Division
menu. You can deactivate Full Screen mode by right clicking on the screen.
Auto Sequence
– Sequences through the Screen Divisions sets. For example, selecting the 1A
and then the Loop button will sequence through 1A, 2A, 3A, 4A and then repeat.