Network setup – OpenEye Gen5 NVR User Manual
Page 53
30777AC
53
NETWORK SETUP
Network Setup allows the user to adjust settings such as Ports, setup emergency PPP information for
use with the Emergency Agent and enable Remote Access.
Time Out Value When attempting to connect to the recorder, if the connection does not succeed during
the timeout period (seconds), the connection will be terminated.
Emergency Port Used to connect with the Alarm Monitor software.
Center Port Used to connect with the OpenEye remote software (Remote, Radius, MDVR). This port
must be specified in the remote software to connect to the recorder.
Note
Center Port 1025 is not available.
Image Port Used to transfer the video to the OpenEye remote software.
Search Port Used to transfer search information to the OpenEye remote software.
Note
If connecting to the recorder through a firewall, the above ports must be open to incoming and
outgoing traffic.
Health Check Port Enables Radius to receive information regarding the health of the recorder.
Use with Emergency Agent
Enable two-way audio between
DVR and Remote Client
Remote Client Ports