Orion System OE392-10 System Manager TS - Manual (Page 66)

Zone
Zone
Index A
SMTS Technical Guide 66
P-S
Power/Comm Distribution Board..........11
Power LED..........55
Preheat Relay..........34
Pre-Heat Setpoint..........29
Prism II..........17, 18, 21, 50
Push-Button Override Duration..........33
R
R-22 Refrigerant..........28
R-410..........28
Real-Time Clock..........4
Refrigerant..........28
Reheat Head Pressure..........33
Reheat Relay..........34
Relays
Alarm Indicator..........34
Cooling Stage..........34
Emergency Heat..........34
Exhaust Fan..........34
External Heat..........34
Gas Reheat..........34
Heating Stage For Heat Stage..........34
Heat Wheel..........34
Mod Cooling..........34
OA Damper..........34
Occupied Indicator..........34
Override Indicator..........34
Preheat..........34
Reversing Valve Relay..........34
Warm Up Relay..........34
Relays Setpoints..........34
Requirements
Environmental..........5
EPROM..........4
Reserved..........29
Reset Button..........55
Return Air..........26
Confi guration..........26
Return Airfl ow Duct Area..........31
Return Airfl ow Sensor Installed..........28
Return Bypass Control..........27
Return Bypass Damper Factor..........33
Return Sensor Offset..........33
Reverse Acting..........52
Reversing Valve Relay..........34
Reversing Valve Used for Cooling..........26
S
SAT HVAC Mode Deadband..........52
Saturation Vapor Pressure..........28
Schedule Auto Mode..........24
Schedule AUTO Mode..........24
Schedule FORCED OFF..........24
Schedule FORCED ON..........24
Schedule Override..........24
Schedules
Setting..........23
Viewing..........23
Schedules Button
Defi ned..........12, 13
Schedule Times Screen..........23
Screen Refresh LED..........55
Screens
Change Passcode..........15
CommLink Settings..........18
CommLink Settings Screen..........17
Login Screen..........14
Main..........14
Schedule Times Screen..........23
Set Clock Hour..........16
Setpoint Data Entry Screen..........25, 51
Set Time & Date..........16
System Alarm Status..........18
System Manager Passcode Levels..........15
Unit Selection..........19
VAV/Zone Controller Alarm Status Screen..........50
VAV/Zone Controller Status Screen..........50
VAV/Zone Controller Temperature Setpoint Screen..........51
VCM-X Alarm Status..........21
VCM-X Modular Status Screen 1..........19
VCM-X Schedules Screen..........23
VCM-X Status Screen 1..........19
VCM-X WSHP (Coil) Status Screen 1..........20
VCM-X WSHP (Tulsa) Status Screen 1..........19
Secure
System..........15
Selecting Units..........19
Selection Buttons
Defi ned..........12
SEND TO <All Days>..........23
SEND TO <Weekdays>..........23
Series Fan Powered Box..........52
SET <24 Hr Mode>..........23
Set Clock Hour..........16
Setpoint Buttons
Defi ned..........12, 13
Setpoint Data Entry Screen..........25, 51
Setpoint Icons
Described..........13