RGBLink VSP 628S User Manual - Manual (Page 30)

2. Hardware Orientation
VSP 628S Front Panel
VSP 628S User Manual 30
VSP 628S Front Panel
Insert power cord and push power to ON position. LCD module on the front
panel will show RGBLINK and go into self verification before it load last
setting config and send processed image to the target monitor. For the first
setup, CV1 input is default source. With front panel keyboard, user can
operate VSP 628S through the menus on LCD panel.
VSP 628S front panel as shown in figure:
RGBLINK
VSP 628
INPUT:CV1
INVAILID SIGNAL
OUTPUT: FREERUN
1024X768@60
RGBlink