Run software, Set up communication, Communication software guideline – RGBLink VSP 628S User Manual User Manual
Page 49
5. Communication Software Guideline
Run Software
VSP 628S User Manual 49
Install communication which comes with the package of VSP 628S device.
Double click
icon from home screen to run the software.
Double click
icon from home screen, and choose and click
to run the software.
VSP 628S communication software interface as shown:
Set Up Communication
When control video processor through PC software, besides the power
cord, the product default equip with a line that is COM (RS-232), 9-pin
(DB9F), RJ11 COM crystal head (6 B4C). Below are the details about
connection of steps:
First connect 9-pin (DB9F) to the computer on the corresponding port, and
connect COM crystal to RS232 port on video processor. Open video
processor; Next, operate the computer, back to computer desktop, right
click 【 My computer 】 to 【 Properties 】, find the 【 Hardware 】 option
card, as follows, left click 【 Device manager 】: