How to add tasks, System setup and operation – RGBLink VSP 628S User Manual User Manual
Page 83
Advertising
6.
SYSTEM SETUP AND OPERATION
How to Add Tasks
VSP 628S User Manual 83
Use ―Device Schedule‖ can add tasks,make device automatically run to
the Schedule input source in specified time or schedule display modes
such as fade in and out.
First of all,
set lower computer current time through host computer ―clock‖.
Note
Reset to factory settings after setting the
clock will affect the time before.
After device clock set, add task plan through‖ Timing Parameters‖.
Advertising