RGBLink VSP 628S User Manual - Manual (Page 82)

6. System Setup and Operations
PIP Setting
VSP 628S User Manual 82
Also you can do the setting for main screen, select IMAGE1 in the 【PIP
SETTING 】 options,.
If you want to preview to switch back signal picture, you can press PIP
buttons once again. Then the light of the button turns out.
The【PIP】Button is multi-screen switching buttons, which IMAGE1 is main
screen, IMAGE2 is sub-screen.
Press 1-7 any buttons directly to preview switching main screen channel.
Also, Press 1-7 any buttons directly to preview switching IMAGE2 channel.
Console Software Setting Each Image's Width,
Height and Position.
Step 1: In work mode, select the dual screen;
Step 2: Set the size and position of Image 1 and Image 2 in the image;
Step 3: After setting, click 【Settings】image output to complete the
dual-screen setup.