RJS Inspector D4000 Auto Optic (FIRMWARE version A.05 and Earlier) - Manual (Page 24)

Operator
’
s Guide Inspector 4000
™
002-5564 RJS, Minneapolis, MN 17
5.4 Storage
Storage will display as either Storage Inactive or Storage % depending on whether
Store and Print is enabled or disabled.
• When Store and Print is enabled, a number and a percentage sign 0 to 99% will display.
• When Store and Print is disabled, Storage Inactive will display.
The Storage Section (from the Main Menu) refers to Store and Print. The display will
show either “Storage Inactive” or “Storage %.”
Scan Calib Setup
Storage Inactive
 “Inactive” displays when Store and Print is inactive.
Scan Calib Setup
Storage XX%

A storage “%” displays when Store and Print is active.

If a % is displayed, it represents the percentage of the buffer that is filled with scan
data.
You may enable or
disable Store and Print by pressing Enter with the cursor on Storage.
( Toggle from one option to the other.)
When Storage is active, press Select to move the cursor to the % sign. Press Enter on the %
sign
to clear the Store and Print buffer.
Note: See Appendix F for details about printing the contents of the Store and Print buffer.