RJS Inspector D4000 Auto Optic (FIRMWARE version A.05 and Earlier) - Manual (Page 54)

Operator
’
s Guide Appendix F
002-5564 RJS, Minneapolis, MN 47
Storage
This option prints all analysis data stored in the buffer. The last bar-code that was scanned is
printed first.
When printing the buffer in multiple scan mode, don’t initiate printing before all scans of the
current analysis are complete, otherwise, some completed scans could be lost.
Note: Scan reflectance profiles are not stored in the Store and Print buffer; only analysis data is stored.
Figure F-1 (See Figure C-1 also)
Profile Resolution: High
Analysis and Profile  prints the analysis (Figure C-1) and also prints the profile (above).
0% ++++++++++Global Threshold ++++++100%
(Dark) (Light)