Seaward 300 PrimeTest User Manual
Page 71
Advertising
PrimeTest 300
Operating Instructions
- 70 -
This sequence will now progress to the Earth Continuity
test as shown. This test will measure the resistance of
the protective earth path.
The
START key icon is flashing, indicating that a key
press is required to initiate the test. The probe icon is
illuminated to indicate that the test probe is required for
this test. Connect the test probe to an exposed metal
part on the equipment under test and press the
START
key to begin measurement.
Real time measurement values are displayed whilst the
test is in progress.
Advertising