Specifications – Super Systems MGA6010 User Manual
Page 6
MGA 6010 Operations Manual
Super Systems Inc.
Page 6 of 54
Specifications
The unit is designed and manufactured for the atmosphere heat treating industry; however, its uses go
beyond the scope of these applications.
CO range:
0.00 to 30.00 %
CO
2
range:
0.000 to 2.000 %
CH
4
range:
0.00 to 15.00 %
H
2
range:
0.00 to 100%
* Note: These sensors have been optimized for use at the levels normally seen in an Endothermic
atmosphere. The ranges can be adjusted to fit other applications. For information regarding
modifications to the ranges shown above, please contact Super Systems.
Sampling method:
Extraction by internal pump (when necessary)
Measurement Method (CO, CO
2
, CH
4
):
Non-Dispersive Infrared (NDIR)
Measurement Method (H
2
):
Thermal Conductivity
Accuracy and repeatability:
± 1% of full scale
Recommended Calibration Interval:
Annual
AC Power Requirements:
110VAC (can be modified to 220V upon request)
Communications:
Ethernet, USB(A), USB(B), RS485 Modbus
Data Storage:
Continuous automatic data logging