Teo IPTelephone Network - Manual (Page 26)

13-280132 Rev. Q Page 26
U U p p d d a a t t e e S S e e t t t t i i n n g g s s
These settings control automatic updating of telephone software and configuration
settings from a TFTP, HTTP, HTTPS, or Teo UC server.
Update Settings
XML Tag Data / Description
<update>
<update_server source=
”src”>
address
</update_server>
<protocol>
type
</protocol>
<program_auto>
enable
</program_auto>
<program_time>
start hour
</program_time>
<program_window>
hours
</program_window>
<config_auto>
ON/OFF
</config_auto>
<config_time>
start hour
</config_time>
<config_window>
hours
</config_window>
</update>
Update server settings.
update_server
src is source of the IP address:
: IP address or server name of the
Update Server. May be provided by DHCP or statically
assigned.
DHCP4 – use address provided by DHCPv4 Option
66, or Option 125 UpdateSrvr parameter, if
available (default)
STATIC – always use default address or name
address or name is the default address in IPv4 or
IPv6 format or DNS fully-qualified domain name.
If TFTP, HTTP or HTTPS protocol is used, a path can
be appended to the server name. This path is where
the digitally signed files are located under the update
server root directory.
protocol: type is the protocol type for the download.
Options for type are:
TEO
TFTP
HTTP
HTTPS
NONE
If <update_server source=DHCP4>, the type may be
provided by DHCPv4 Option 66 or 125.
program_auto: Enable/disable automatic program
updates (not used with TEO protocol).
ON
OFF (default)