Teo IPTelephone Network - Manual (Page 30)

Teo IP Telephone Network Administration Guide
Page 30 13-280132 Rev. Q
Network Settings
XML Tag Data / Description
<ip6_phone_global>
index="index">
address
</ip6_phone_global>
One of five IPv6 Global Addresses for the phone.
index is the global address is being set: G1, G2, G3,
G4 or G5.
<network_dad>
ON/OFF
</network_dad>
IPv6 Duplicate Address Detection.
In autoconfiguration environments, duplicate
addresses can be detected and managed.
ON (default)
OFF
<network_echo_reply>
ON/OFF
</network_echo_reply>
Enables the ability to send an Echo Reply message in
response to an Echo Request message sent to an IPv6
multicast or anycast address.
ON (default)
OFF
<network_ignore_redirects>
ON/OFF
</network_ignore_redirects>
Disables the sending of IPv4 or IPv6 Internet Control
Message Protocol (ICMP) redirect messages.
ON (default)
OFF
<ip_pri_dns source="src">
address
</ip_pri_dns_svr>
IP Address of the Primary DNS Server. May be
provided by DHCP or statically assigned.
src is source of the IP address:
DHCP4 – use address provided by DHCPv4 Option 6,
if available (default)
STATIC – always use default address
address is the default address in IPv4 or IPv6 format.
<ip_sec_dns>
address
</ip_sec_dns>
IP Address of the Secondary DNS Server.
address is the default address in IPv4 or IPv6 format.
If <ip_pri_dns_svr source=DHCP4>, the address will be
configured by DHCPv4 Option 6, if available.
<phone_domain>
domain name
</phone_domain>
The domain name for the enterprise. For example, the
“teotech.com” portion of the SIP URI
[email protected].
Maximum length is 128 ASCII characters.
The default is a NULL string.
If <ip_dhcp4_enable> is ON, phone_domain will be
configured by DHCPv4 Option 15, if available.