Teo IPTelephone Network - Manual (Page 62)

Teo IP Telephone Network Administration Guide
Page 62 13-280132 Rev. Q
BLF_PRES, BLF_DLOG, and DSS Keys
XML Tag Data / Description
<codec3>
codec type
</codec3>
2 nd (optional) Codec Type:
G711
G729A
G722 (default)
NONE
<ptime>
milliseconds
</ptime>
Packetization time.
10, 20, 30, 40 milliseconds, default value = 20
<jitter_buffer_adaptive>
buffer type
</jitter_buffer_adaptive>
Jitter Buffer Type:
ON
(adaptive) (default)
OFF (fixed)
<jitter_delay_min>
milliseconds
</jitter_delay_min>
Minimum adaptive Jitter Buffer Delay
(only used if jitter_buffer_adaptive is ON):
0 – 280 milliseconds, default value = 10
<jitter_delay_max>
milliseconds
</jitter_delay_max>
Maximum adaptive Jitter Buffer Delay
(only used if jitter_buffer_adaptive is ON):
0 – 300 milliseconds, default value = 100
<jitter_delay>
milliseconds
</jitter_delay>
Fixed Jitter Buffer Delay
(only used if jitter_buffer_adaptive is OFF):
10 – 90 milliseconds, default value = 35
<speeddial>
dial string
</speeddial>
Speed Dial (DSS) string, up to 128 characters
{pause} inserts a pause into the dial string.
# at the end of the dial string dials the number
immediately.
Speed Dial keys are part of the multifunction keys section.
Speed Dial Keys
XML Tag Data / Description
<label>
label text
</label>
On-screen key label, 18 characters max.
(7810 series only).
<speeddial>
dial string
</speeddial>
Speed Dial digit/character string, 128 characters max.
{pause} inserts a pause into the dial string.
# at the end of the dial string dials the number
immediately.