Teo IPTelephone Network - Manual (Page 41)

Security Guidelines
13-280132 Rev. Q Page 41
SIP Settings
XML Tag Data / Description
<sip_proxy_addr source="src">
address or name
</sip_proxy_addr>
IP address or server name of the SIP Proxy Server
(Call Server). May be provided by DHCP or statically
assigned.
src is source of the IP address:
DHCP4 – use address provided by DHCPv4 Option
120, or Option 125 SipProxyServer
parameter, if available (default)
STATIC – always use default address or name
address or name is the default address in IPv4 or
IPv6 format or DNS fully-qualified domain name.
<sip_proxy_port>
port number
</sip_proxy_port>
Port number used by the phone to send SIP signaling
messages to the Proxy Server. The form is xxxxx with
leading zeros suppressed.
1025 – 65534, default value = 5060
If <sip_proxy_addr source= DHCP4> the port number
will be provided by DHCP Option 125, SipProxyPort
parameter, if available.
<sip_registrar>
address or name
</sip_registrar>
IP address or domain name of the SIP Registrar (most
server implementations combine this into a single SIP
server application).
If left blank or omitted, <sip_proxy_addr> will be
used. This value is used inside SIP message headers,
in the form <line_id>@<sip_registrar>:<sip_reg_port>,
to reference the SIP server (e.g.
[email protected]:5060 or 1000@teo:5060).
If <sip_proxy_addr source= DHCP4> SIP Registrar will
be provided by DHCP Option 125, SipRegistrar
parameter, if available.
<sip_reg_port>
port number
</sip_reg_port>
Port number for the SIP Registrar.
1025 – 65534, default value = 5060
This value is used inside SIP message headers, in the
form <line_id>@<sip_registrar>:<sip_reg_port>, to
reference the SIP server.
If <sip_proxy_addr source= DHCP4> the port number
will be provided by DHCP Option 125, SipRegPort
parameter, if available.