EXP Computer C4077-90960 - Manual (Page 80)

Cleaning Spilled Toner
Defective toner cartridges can develop leaks. Also, after a paper jam has
occurred, there may be some toner remaining on the rollers and guides
inside the printer. The pages that print immediately after the jam may pick
up this toner.
Clean spilled toner with a cloth slightly dampened in cold water. Do not
touch the Transfer Roller with the damp cloth or with your fingers. Do not
use a vacuum cleaner unless it is equipped with a micro-fine particle filter.
N o t e If toner gets on your clothing, use cold water to remove it. Hot water sets
toner stains into fabric.
Component Cleaning Method/Notes
Outside Covers Use a water-dampened cloth. Do not use
solvents or ammonia-based cleaners.
Inside General Use a dry, lint free cloth. Remove all dust, spilled
toner, and paper particles.
Paper Pickup, Feed, and
Retard Rollers Use a water-dampened lint-free cloth.
Separation Pad Use a dry lint-free cloth.
Registration Roller Use a dry lint-free cloth.
Transfer Roller Use a dry, lint-free cloth. DO NOT TOUCH with
your fingers.
Fuser Assembly Use a water-dampened lint-free cloth.
Table 4-1 Cleaning the Printer
4
Maintenance & Adjustments
Maintenance and Adjustments 4-5