AEC VacTrac Series Conveying Systems - Manual (Page 66)

VacTrac™ Conveying Systems 12-Station Controllers Page 65
RAMP DN DLY: 8.000s
SETTING FOR PUMP n
SET PUMP STAGE TIME?
NO/YES
SELECT PUMP 1 OR 2
USE KEYPAD TO ENTER
Ramp down time is a delay that allows the pump to come to a
full stop when needed. The control cannot restart until this
delay is completed. This is also known as the Shutdown delay.
This delay defaults to 8.0 seconds and should not be altered
unless instructed to do so by the AEC Service Department.
„ Select the pump for altering ramp down time.
The following screen displays.
Using the keypad:
„ Enter the new time and press the ENTER key to save the new
setting.
Setting the Pump Stage Time
At the above message prompt:
„ Press the YES key to enter the Pump Stage Time menu.