AEC VacTrac Series Conveying Systems - Manual (Page 9)

Page 8 12-Station Controllers VacTrac™ Conveying Systems
System capacity is directly affected by the pressure drop in the
overall system, such as number of material line bends, pipe
length, Y-tubes, T-tubes, etc.
Use the minimum effective amount of vinyl flex hose to maximize
material line efficiency. Keep material lines as straight as possible.
Refer to the VacTrac™ Mechanical Components Product Manual
(AEC Part No. A0536580) for installation recommendations.
Important!
Vacuum leaks occurring anywhere in your system reduce capacity.
1-4 Equipment Cycle
VacTrac™ material conveying systems are used for automatic
pneumatic handling of most free-flowing, dry, pelletized, or
granular materials. Material characteristics determine the type of
equipment needed to convey the material.
1-5 Models Covered by this Manual
VacTrac™ Series 12-Station Controller
• Single board controller.
• 24 VDC or 115 VAC control output available.
• Easy-to-use 16-key operator interface keypad.
• Optional audible/visual alarm.