Pvid – Amer Networks SS3GR24i User Manual
Page 111
Advertising
SS3GR24i/SS3GR48i Layer 3 Switch CLI Reference
105
Example usage:
Remove VLAN 3.
24P switch(config)# no interface vlan3
PVID
Purpose
Used to setup PVID on the switch.
Syntax
PVID <vlan-id>
Description
To configure PVID on port.
Parameters <vlan-id> VLAN ID.
Menu
VLAN Management -> VLAN Port Configuration
Menu
Restrictions
Interface configuration
Example usage:
Set port 2 PVID 3
24P switch(config)# interface fa1/2
24P switch(config-if)# PVID 3
Advertising
This manual is related to the following products: