Snmp-server enable traps snmp, Snmp-server enable traps linkupdown – Amer Networks SS3GR24i User Manual
Page 39
SS3GR24i/SS3GR48i Layer 3 Switch CLI Reference
33
snmp-server enable traps snmp
Purpose
Used to start or stop the set SNMP notification.
Syntax
snmp-server enable traps snmp
{authentication|coldstart|warmstart}
Description
To enable or disable the specified SNMP notification.
Parameters
<authentication> Enable or disable the authentication
failure trap
<coldstart > Enable or disable the coldstart trap
<warmstart> Enable or disable the warmstart trap
Menu
NMP Configuration -> SNMP Trap Receiver
Configuration
Restrictions
Global configuration
Example usage:
Enable individual trap authentication failure
24P switch(config)# snmp-server enable traps snmp
authentication
snmp-server enable traps linkupdown
Purpose
Used to configure link down trap ports.
Syntax
snmp-server enable traps linkupdown
<Port
number>
Description
To add or delete link down trap ports
Parameters
<port number>
Menu
SNMP Trap Receiver Configuration -> Enable/Disable
Restrictions
Global configuration