Amer Networks SS3GR24i - Manual (Page 40)

SS3GR24i/SS3GR48i Layer 3 Switch CLI Reference
34
Example usage:
Add port 1/1 linkupdown trap.
24P switch(config)# snmp-server enable traps linkupdown 1/1
snmp-server enable traps bridge
Purpose Used to configure trap settings.
Syntax snmp-server enable traps bridge
{newRoot|topologyChange}
Description To enable or disable newRoot trap and
topologyChange trap.
Parameters <newRoot> Enable or disable newRoot trap
<topologyChange> Enable or disable topology
Change trap
Menu SNMP Trap Receiver Configuration -> Enable/Disable
Restrictions Global configuration
Example usage:
Enable newroot trap.
24P switch(config)# snmp-server enable traps bridge newroot