Amer Networks SS3GR24i - Manual (Page 37)

SS3GR24i/SS3GR48i Layer 3 Switch CLI Reference
31
snmp-server community
Purpose Used to configure the access rights for the SNMP
protocol.
Syntax snmp-server community <community> {RO|RW}
[<ip>]
Description To set up the community access string when using
SNMP protocol.
Parameters <community> A string of length with 20 characters
maximum
RO Specifies read-only access
RW Specifies read-write access
<ip> Manager IP address.
Menu SNMP Configuration -> SNMP Management
Configuration
Restrictions Global configuration
Example usage:
Set snmp read community public in index 1 for all ip.
24P switch(config)# snmp-server community 1 public RO