Sntp poll-interval, Sntp daylight-saving – Amer Networks SS3GR24i User Manual
Page 149
SS3GR24i/SS3GR48i Layer 3 Switch CLI Reference
143
sntp poll-interval
Purpose
Used to setup the poling interval for sntp operation.
Syntax
sntp poll-interval <min>
Description
To configure the polling interval for sntp operation.
Parameters
<min> Integer value ranges from 1 to 1440 minutes.
Menu
Basic Switch Configuration -> SNTP Configuration
Menu
Restrictions
Global configuration
Example usage:
Set the switch to use SNTP polling interval of 300 minutes.
24P switch(config)# sntp poll-interval 300
sntp daylight-saving
Purpose
Used to configure daylight savings time for the switch.
Syntax
sntp daylight-saving
Description
To enable or disable daylight saving, if time zone is
applicable.
Parameters None.
Menu
Basic Switch Configuration -> SNTP Configuration
Menu
Restrictions
Global configuration