Amer Networks SS3GR24i - Manual (Page 82)

SS3GR24i/SS3GR48i Layer 3 Switch CLI Reference
76
spanning-tree mst version
Purpose Used to select what type of STP the switch uses.
Syntax spanning-tree mst version
{stpCompatible|rstp|mstp}
Description To select type of spanning tree: simple spanning tree,
rapid spanning tree or multiple-spanning tree.
Parameters <rstp> RSTP Version
<mstp> MSTP Version
Menu Advanced Switch Configuration -> Multiple Spanning
Tree
Restrictions Global configuration
Example usage:
Set the switch to use STP version of spanning tree.
24P switch(config)# spanning-tree mst version stp
spanning-tree mst max-age
Purpose Used to configure the max time the switch waits
before reconnecting to the network.
Syntax spanning-tree mst max-age <seconds>
Description To set the max-age time in seconds that the switch
waits before trying to reconfigure the network when it
is the root bridge.
Parameters <seconds> Integer ranges from 6 to 28
Menu Multiple Spanning Tree Configuration -> Cist
Configuration
Restrictions Global configuration