Amer Networks SS3GR24i - Manual (Page 68)

SS3GR24i/SS3GR48i Layer 3 Switch CLI Reference
62
storm-control multicast
Purpose Used to setup a multicast storm for a port.
Syntax storm-control multicast
Description To configure the multicast storm control of a port.
Parameters None.
Menu Advanced Switch Configuration -> Storm Control
Restrictions Interface configuration
Example usage:
Set port 1/1 multicast status to enabled.
24P switch(config)# interface fa1/1
24P switch(config-if)# storm-control multicast
storm-control unicast
Purpose Used to setup a unicast storm for a port.
Syntax storm-control unicast
Description To configure the unicast(DLF) storm control of a port.
Parameters Menu.
Menu Advanced Switch Configuration -> Storm Control
Restrictions Interface configuration
Example usage:
Set port 1/1 unicast status to enabled.
24P switch(config)# interface fa1/1
24P switch(config-if)# storm-control unicast