ARM Electronics JDVR - Manual (Page 14)

B e s t p ic tu re q u a lity D V R
JP E G 2000 S tan d- alo ne D VR
13
4-1. Start-up DVR
CHAP. 4 Operation
Before turning on the DVR be sure that everything is firmly connected. Turn on the DVR and g
o to the Menu using the relevant Login Password and you will then see the System Setup Screen.
You may proceed by referring to the related chapters describing the various functions.
4-2. System Log-In
DVR LOG-IN
ENTER PASSWORD : _ _ _ _ _ _ _ _
INPUT YOUR OWN PASSWORD
TO EXIT, PRESS [MENU] 1) To enter into the setup menu, press the [MENU] button.
2) Enter password with channel number button
from No.1 to No.10 on the front of the DVR unit.
(Maximum of 8 digits are available)
3) After inputting the password, press the [ENTER] button.
Administrator :
If the password entered matches previously set password, “ LOGIN ADMIN” message appears and
you can enter into SYSTEM SETUP.
If the password entered does not match previously set password, the DVR unit goes back to live
display mode.
Factory default password is blank. For log-in, just press [MENU] button, followed by the [ENTER]
button.
-Factory default password
ADMIN : (NULL)
MANAGER : ‘ 1 ’
USER 1~USER8 : ‘ 2 ’ ~ ’ 9 ’
※ We recommend configuring a unique password as per the procedure in
SYSTEM MENU - CONFIGURATION - PASSWORD SETUP.
※ For security reasons, be sure to make note of your own password.
CHAP.4 Operation