ARM Electronics JDVR - Manual (Page 27)

B e s t p ic tu re q u a lity D V R
JP E G 2000 S tan d- alo ne D VR
26
(1)OVERWRITE : Set overwrite or stop recording when the
HDD is full.
(2) MULTIPLEX : Set DUPLEX. Or TRIPLEX
- DUPLEX : Playback and Record
(Recording during playback)
- TRIPLEX : Triplex - Record/Playback/Remote playback
simultaneously.Under triplex mode, the
record and playback speed will decrease
50% of frame rate.
(3) QUALITY : Set record quality. Actually it is fixing data
size of image for each picture quality level
BASIC / NORMAL / ENHANCED / FINE / SUPER FINE
(4) RESOLUTION : Set recording resolution.
- 120 ips at 720x240 (720x288)
- 240 ips at 360x240 (360x288)
※ Images recorded in 360x240(360x288)
It is not possible to see those images in full screen
mode in playback.Recording in half or quad resolution
is recommended for higher recoding speed.
(5) RECORD SPEED : Set record speed of alarm/ motion/ continuous mode(or skip rate)
- 1/1x, 1/2x, ………. 1/999x record speed
- ex: 1/2x ) R->S->R->S…
- ex: 1/3x ) R->S->S->R->S->S->R…
- ex: 1/4x ) R->S->S->S->R->S->S… ( R : RECORD S : SKIP )
CHAP. 5 Set Up
5-4. RECORD SETUP
This is the most important configuration of the DVR.
Enter into SYSTEM MENU-RECORD SETUP
and press the [ENTER] button.
SELECT MENU : ▲▼, & [ENTER]
RECORD CONFIGURATION
SCHEDULE SETUP
HOLIDAY SETUP
RECORD SETUP
1) RECORD CONFIGURATION
ON
TRIPLEX
ENHANCED
120IPS 720*240
1/1X
1/1X
1/1X
SELECT MENU : ▲▼, & [ENTER]
OVERWRITE
MULTIPLEX
QUALITY
RESOLUTION
RECORD IN ALARM
RECORD IN MOTION
CONTINUOUS RECORD
RECORD CONFIGURATION
Use direction button to move and [ - ] [+] button to set value.