ARM Electronics JDVR - Manual (Page 19)

B e s t p ic tu re q u a lity D V R
JP E G 2000 S tan d- alo ne D VR
18
CHAP. 4 Operation
4-9. PAN/TILT/ZOOM Camera Operation
Press [PTZ] button first for PTZ control mode. Numeric buttons from 1 to 16 and direction buttons are
assigned for each PTZ command, and user can control PTZ camera connected to DVR unit by
pressing any one of those 20 buttons, one after the other, as needed, and it is just like control by
separate PTZ controller.
PTZ command Button
PAN LEFT
PAN LEFT
TILT DOWN
TILT UP
FUNCTION
PRESET AUTO
PRESET GOTO
PRESET CLEAR
RIGHT BUTTON
LEFT BUTTON
DOWN BUTTON
UP BUTTON
13/F1 ~ 16/F4
12/AUTO
11/GOTO
10/CLEAR
9/SET
8/TELE
7/WIDE
6/FAR
5/NEAR
PRESET SET
ZOOM OUT
ZOOM IN
FOCUS FAR
FOCUS NEAR
IRIS CLOSE 4/CLOSE
IRIS OPEN 3/OPEN
LIGHT OFF 2/OFF
LIGHT ON 1/ON
PTZ command Button
4-10. Data Back-Up
Enter into SYSTEM MENU-BACKUP-CDR SETUP.
1) Insert empty CD-R media into CD writer and select the start time & date from which you want to back up.
※ The START & END time / date in HDD sub-menu only shows start and end of recording.
This is not selectable and editable.
※ 700MB on CD-R sub-menu represent size of CD-R media inserted.
2) To set start time of back-up and back-up data size, press the [ENTER] button first on [START] or [SIZE]
sub-menu and adjust using [+] or [-] button and move using [LEFT] and [RIGHT] button for next
change. After setting the time & date and back-up data size, press the [ENTER] button again to exit.
※ End of back-up time will be calculated automatically as per start time & date and the back-up
data size you set.
※ User can select the back-up data size (size of back-up data from start of back-up) on [SIZE] item but
END of back-up time is automatically determined by DVR system.
3) Press [ENTER] button on BURN sub-menu. DVR system starts burning CD.
4) When burning is completed, CD-R media will come out automatically. In the next CD back-up, start
time of CD-R shall be the end time of previous CD-back-up, and you can back-up from that for
continuous data back-up. If you need another backup, repeat the above procedure. To stop backup,
press the [MENU] button.
※ During burning CD, it’s impossible to cancel burning process.
5) User can verify the back-up CD on PC with BACK-UP CD PLAYER (Included in Package).
CD-R SETUP
HDD
[START] 2005/AUG/07 AM04:04:12
[ END ] 2005/AUG/08 PM08:12:23
CD-R
[START] 2005/AUG/07 AM04:04:12
[ END ] 2005/AUG/08 PM08:12:23
[ SIZE ] 000MB
BURN
SELECT MENU :cd, & [ENTER]
CD-R SETUP
HDD
[START] 2005/AUG/07 AM04:04:12
[ END ] 2005/AUG/08 PM08:12:23
CD-R 700 MB
[START] 2005/AUG/07 AM04:04:12
[ END ] 2005/AUG/08 PM08:12:23
[ SIZE ] 700 MB - > 700MB
BURN
CD-RW BURNING : IMAGE DATA.
SELECT MENU :cd, & [ENTER]