ARM Electronics JDVR - Manual (Page 43)

B e s t p ic tu re q u a lity D V R
JP E G 2000 S tan d- alo ne D VR
42
10 : Calendar
Use this to select the date you wish to playback. The filled in square outlines the date that is at the
beginning of the hard drives. The outlined square indicates the data at the end of the hard drives.
Select the date you wish to view. Verify a filled in square for that particular date. If an invalid date is
selected it will default to the beginning of the hard drive(s).
Notice : To see continuous live view, it is recommended to set recording mode of DVR unit
in continuous recording mode. If it is set at motion recording mode, image transmission
is done only when motion is detected, and user only see still images for most of cases.
Notice : While user access to DVR unit via IP network to see live view, the DVR unit continues to record.
While user see recorded images, DVR unit shows live images through monitor connected
to DVR unit, but recording is stopped, if MULTIPLEX mode in the SETUP menu in DVR is
set at SIMPLEX.
CHAP. 6 Network Setup