H3C Technologies H3C S7500E Series Switches User Manual

Page 205

Advertising
background image

12-24

# Remove the IP address of interface VLAN-interface 2 on Switch B.

<SwitchB> system-view

[SwitchB] interface vlan-interface 2

[SwitchB-Vlan-interface2] undo ip address

# Display information of the track entry on Switch A.

[SwitchA] display track all

Track ID: 1

Status: Negative

Notification delay: Positive 0, Negative 0 (in seconds)

Reference object:

BFD Session:

Packet type: Echo

Interface : Vlan-interface2

Remote IP : 10.2.1.2

Local IP : 10.2.1.1

# Display the routing table of Switch A.

[SwitchA] display ip routing-table

Routing Tables: Public

Destinations : 9 Routes : 9

Destination/Mask Proto Pre Cost NextHop Interface

10.2.1.0/24 Direct 0 0 10.2.1.1 Vlan2

10.2.1.1/32 Direct 0 0 127.0.0.1 InLoop0

10.3.1.0/24 Direct 0 0 10.3.1.1 Vlan3

10.3.1.1/32 Direct 0 0 127.0.0.1 InLoop0

20.1.1.0/24 Direct 0 0 20.1.1.1 Vlan5

20.1.1.1/32 Direct 0 0 127.0.0.1 InLoop0

30.1.1.0/24 Static 80 0 10.3.1.3 Vlan3

127.0.0.0/8 Direct 0 0 127.0.0.1 InLoop0

127.0.0.1/32 Direct 0 0 127.0.0.1 InLoop0

The output information above indicates the BFD detection result: the next hop 10.2.1.2 is unreachable

(the status of the track entry is Negative), and the backup static route takes effect, and Switch A

forwards packets to 30.1.1.0/24 through Switch C and Switch B.

# When the master route fails, the hosts in 20.1.1.0/24 can still communicate with the hosts in

30.1.1.0/24.

[SwitchA] ping -a 20.1.1.1 30.1.1.1

PING 30.1.1.1: 56 data bytes, press CTRL_C to break

Reply from 30.1.1.1: bytes=56 Sequence=1 ttl=254 time=2 ms

Reply from 30.1.1.1: bytes=56 Sequence=2 ttl=254 time=1 ms

Reply from 30.1.1.1: bytes=56 Sequence=3 ttl=254 time=1 ms

Reply from 30.1.1.1: bytes=56 Sequence=4 ttl=254 time=2 ms

Reply from 30.1.1.1: bytes=56 Sequence=5 ttl=254 time=1 ms

--- 30.1.1.1 ping statistics ---

5 packet(s) transmitted

5 packet(s) received

0.00% packet loss

round-trip min/avg/max = 1/1/2 ms

# The output information on Switch B is similar to that on Switch A. When the master route fails, the

hosts in 30.1.1.0/24 can still communicate with the hosts in 20.1.1.0/24.

[SwitchB] ping -a 30.1.1.1 20.1.1.1

Advertising
This manual is related to the following products: