Defining a traffic behavior – H3C Technologies H3C S6300 Series Switches User Manual
Page 28
18
Option Description
control-plane protocol-group
protocol-group-name
Matches the control plane protocol group.
The protocol-group-name argument can be critical, important, management,
monitor, normal, or redirect.
customer-dot1p
dot1p-value&<1-8>
Matches 802.1p priority values in inner VLAN tags of double-tagged
packets.
The dot1p-value&<1-8> argument is a list of 802.1p priority values. An
802.1p priority ranges from 0 to 7. &<1-8> indicates that you can enter up
to eight 802.1p priority values.
customer-vlan-id vlan-id-list
Matches VLAN IDs in inner VLAN tags of double-tagged packets.
The vlan-id-list argument specifies a space-separated list of up to 10 VLAN
items. Each item specifies a VLAN or a range of VLANs in the form of
vlan-id1 to vlan-id2. The value for vlan-id2 must be equal to or greater than
the value for vlan-id1. The value range for the vlan-id argument is 1 to 4094.
destination-mac mac-address
Matches a destination MAC address.
dscp dscp-value&<1-8>
Matches DSCP values.
The dscp-value&<1-8> argument is a list of DSCP values. A DSCP value
ranges from 0 to 63 or can be a keyword shown in
. &<1-8>
indicates that you can enter up to eight DSCP values.
ip-precedence
ip-precedence-value&<1-8>
Matches IP precedence.
The ip-precedence-value&<1-8> argument is a list of IP precedence values.
The value range is 0 to 7. &<1-8> indicates that you can enter up to eight IP
precedence values.
protocol protocol-name
Matches a protocol.
The protocol-name argument can be ARP, IP, or IPv6.
qos-local-id local-id-value
Matches a local QoS ID, which ranges from 1 to 4095. The switch supports
local QoS IDs in the range of 1 to 3999.
service-dot1p
dot1p-value&<1-8>
Matches 802.1p priority values in outer VLAN tags.
The dot1p-value&<1-8> argument is a list of 802.1p priority values. An
802.1p priority ranges from 0 to 7. &<1-8> indicates that you can enter up
to eight 802.1p priority values.
service-vlan-id vlan-id-list
Matches VLAN IDs in outer VLAN tags.
The vlan-id-list argument specifies a space-separated list of up to 10 VLAN
items. Each item specifies a VLAN or a range of VLANs in the form of
vlan-id1 to vlan-id2. The value for vlan-id2 must be equal to or greater than
the value for vlan-id1. The value range for the vlan-id argument is 1 to 4094.
source-mac mac-address
Matches a source MAC address.
Defining a traffic behavior
A traffic behavior is a set of QoS actions (such as traffic filtering, shaping, policing, and priority marking)
to take on a traffic class of traffic.
To define a traffic behavior: